Rendering: BuildX
Supply and install a single-row clay brick landscape border (trench, base, set bricks dry-laid or in mortar); tear-out of old edging extra.
Brick Edging typically costs $12 to $30 per linear ft (national average as of 2026). Most straightforward jobs start near $12 per linear ft. Final pricing depends on material quality, project scope, local labor rates, and site conditions. Use our free calculator below for a personalized estimate.
Quality Level
Estimated Total Cost
50 linear ft • Standard Quality
National average — enter your ZIP for local prices.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
$10 – $26 per linear ft
Single row of clay bricks dry-laid on compacted sand in a shallow trench
$12 – $30 per linear ft
Single row of clay bricks on compacted gravel and sand base, tight joints, soil backfilled firm
$15 – $38 per linear ft
Single row of solid clay pavers set in a mortar bed on compacted base with mortar haunch behind
| Component | Category | Low | High | Unit |
|---|---|---|---|---|
| Materials | material | $5.40 | $14 | linear ft |
| Labor | labor | $4.20 | $11 | linear ft |
| Supplies & Other | supplies | $1.44 | $3.60 | linear ft |
| Equipment & Disposal | equipment | $0.96 | $2.40 | linear ft |
Supply and install a single-row clay brick landscape border (trench, base, set bricks dry-laid or in mortar); tear-out of old edging extra.
Typical brick edging pricing range per linear ft.
Starting price $12 per linear ft. National average as of 2026. This is a directional range. Final pricing depends on scope, materials, access, and local labor rates.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
Rubber mallet tapping bricks to level
Rendering: BuildX
Find a pro to do thisString line guiding a row of edging bricks
Rendering: BuildX
Find a pro to do thisBrick Edging usually lands between $12 to $30 per linear ft. That range reflects current national calculator data after materials, labor, supplies, equipment, and disposal are rolled together. Your real quote will move based on quantity, site conditions, finish level, and contractor availability in your ZIP code.
Supply and install a single-row clay brick landscape border (trench, base, set bricks dry-laid or in mortar); tear-out of old edging extra.
Material selections can move the budget faster than anything else, with current material allowances landing around $5.40 to $13.5 per linear ft.
Labor complexity is the next major swing factor, with installation or trade time currently averaging $4.20 to $10.5 per linear ft.
Smaller consumables still matter, because supplies are contributing about $1.44 to $3.60 per linear ft.
Specialty tools, access equipment, cleanup, and disposal can add another $0.96 to $2.40 per linear ft.
Scope changes, premium finishes, difficult access, demolition, and permit requirements can push the total toward the high end of the range. Cleaner access, standard finishes, and bundled work often keep the job closer to the low end.
Get multiple itemized bids, ask contractors to separate materials from labor, and confirm what is included before you compare totals. Scheduling during a slower season and bundling adjacent work can also reduce mobilization costs.
Keep specifications tight before work starts. Change orders are one of the fastest ways to blow past the original budget, especially when material lead times or specialty trades are involved.
DIY can make sense when you already own the tools, understand the prep requirements, and can tolerate schedule risk. Hiring a pro is usually the better move when mistakes would affect finish quality, code compliance, waterproofing, structural performance, or warranty coverage.
View local pricing for brick edging across 51 states.
Find contractors who list this service and ask for a written quote.
Cost guides for property owners. Contractor ID for the shops who do the work.
Use the calculator range of $12 to $30 per linear ft as your baseline, then compare that against the time, tool rentals, material waste, and rework risk you would take on by doing the project yourself.
Most brick edging jobs start with site review, measurements, and material confirmation. From there the crew usually handles preparation, core installation or repair work, cleanup, and a final walkthrough to confirm the finished scope matches the quote.
Ask each contractor how they handle protection of adjacent finishes, debris removal, and change approvals. Those three points tend to separate a clean project from an expensive headache.