Rendering: BuildX
Supply and install wood or polyurethane crown molding where ceiling meets wall, including caulk and nail holes; painting extra.
Ceiling Molding typically costs $7 to $16 per linear ft (national average as of 2026). Most straightforward jobs start near $7 per linear ft. Final pricing depends on material quality, project scope, local labor rates, and site conditions. Use our free calculator below for a personalized estimate.
Quality Level
Estimated Total Cost
50 linear ft • Standard Quality
National average — enter your ZIP for local prices.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
$5.95 – $14 per linear ft
3-1/2 in. primed finger-jointed pine crown, coped inside corners, caulked, holes filled
Rendering: BuildX
Find a pro to do this$7 – $16 per linear ft
5 in. primed solid pine crown, coped inside corners, caulked, holes filled
Rendering: BuildX
Find a pro to do this| Component | Category | Low | High | Unit |
|---|---|---|---|---|
| Materials | material | $3.15 | $7.20 | linear ft |
| Labor | labor | $2.45 | $5.60 | linear ft |
| Supplies & Other | supplies | $0.84 | $1.92 | linear ft |
| Equipment & Disposal | equipment | $0.56 | $1.28 | linear ft |
Supply and install wood or polyurethane crown molding where ceiling meets wall, including caulk and nail holes; painting extra.
Typical ceiling molding pricing range per linear ft.
Starting price $7 per linear ft. National average as of 2026. This is a directional range. Final pricing depends on scope, materials, access, and local labor rates.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
Ceiling Molding usually lands between $7 to $16 per linear ft. That range reflects current national calculator data after materials, labor, supplies, equipment, and disposal are rolled together. Your real quote will move based on quantity, site conditions, finish level, and contractor availability in your ZIP code.
Supply and install wood or polyurethane crown molding where ceiling meets wall, including caulk and nail holes; painting extra.
Material selections can move the budget faster than anything else, with current material allowances landing around $3.15 to $7.20 per linear ft.
Labor complexity is the next major swing factor, with installation or trade time currently averaging $2.45 to $5.60 per linear ft.
Smaller consumables still matter, because supplies are contributing about $0.84 to $1.92 per linear ft.
Specialty tools, access equipment, cleanup, and disposal can add another $0.56 to $1.28 per linear ft.
Scope changes, premium finishes, difficult access, demolition, and permit requirements can push the total toward the high end of the range. Cleaner access, standard finishes, and bundled work often keep the job closer to the low end.
Get multiple itemized bids, ask contractors to separate materials from labor, and confirm what is included before you compare totals. Scheduling during a slower season and bundling adjacent work can also reduce mobilization costs.
Keep specifications tight before work starts. Change orders are one of the fastest ways to blow past the original budget, especially when material lead times or specialty trades are involved.
DIY can make sense when you already own the tools, understand the prep requirements, and can tolerate schedule risk. Hiring a pro is usually the better move when mistakes would affect finish quality, code compliance, waterproofing, structural performance, or warranty coverage.
BuildX Pro researches and reviews the national price range for Ceiling Molding, then adjusts it to your ZIP code for local labor and material costs using the public data below. Last checked Nov 2026.
View local pricing for ceiling molding across 51 states.
Find contractors who list this service and ask for a written quote.
Cost guides for property owners. Contractor ID for the shops who do the work.
$8.75 – $20 per linear ft
Two-piece primed solid pine crown about 6 in. tall with a flat backer strip below, coped corners, caulked, holes filled
Rendering: BuildX
Find a pro to do thisWhite crown molding framing a tray ceiling with a chandelier
Photo: The Finishing Company Richmond Va from Richmond,Virginia, United States · CC BY 2.0 · Source
Find a pro to do thisCoffered ceiling with white crown molding and a ceiling fan
Photo: The Finishing Company Richmond Va from Richmond,Virginia, United States · CC BY 2.0 · Source
Find a pro to do thisStepped crown molding along a tray ceiling edge above a window valance
Photo: The Finishing Company Richmond Va from Richmond,Virginia, United States · CC BY 2.0 · Source
Find a pro to do thisRecessed ceiling panel with trim molding in a yellow dining room
Photo: The Finishing Company Richmond Va from Richmond,Virginia, United States · CC BY 2.0 · Source
Find a pro to do thisUse the calculator range of $7 to $16 per linear ft as your baseline, then compare that against the time, tool rentals, material waste, and rework risk you would take on by doing the project yourself.
Most ceiling molding jobs start with site review, measurements, and material confirmation. From there the crew usually handles preparation, core installation or repair work, cleanup, and a final walkthrough to confirm the finished scope matches the quote.
Ask each contractor how they handle protection of adjacent finishes, debris removal, and change approvals. Those three points tend to separate a clean project from an expensive headache.