Basic
$1.32 – $3.13 per sq ft
25-gauge galvanized 7/8 in. hat channel at 16 in. on center, fastened with fasteners matched to the substrate
Install metal hat (furring) channel at 16-24 inch centers on masonry, framing or ceilings to receive drywall, priced per sq ft of surface.
Furring Channel in Albuquerque, New Mexico typically costs $1.56 to $3.69 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Albuquerque are 9.0% lower than the national average for furring channel.
National average: $1.69 – $4 per sq ft
$1.32 – $3.13 per sq ft
25-gauge galvanized 7/8 in. hat channel at 16 in. on center, fastened with fasteners matched to the substrate
$1.56 – $3.69 per sq ft
20-gauge galvanized 7/8 in. hat channel at 16 in. on center, fastened and shimmed flat
$1.95 – $4.61 per sq ft
20-gauge galvanized 7/8 in. hat channel at 16 in. on center shimmed to a flat plane, extra channel at board ends and openings
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $0.73 – $1.73 | sq ft |
| Labor | labor | $0.50 – $1.19 | sq ft |
| Supplies & Other | supplies | $0.19 – $0.46 | sq ft |
| Equipment & Disposal | equipment | $0.13 – $0.31 | sq ft |
Material costs in Albuquerque run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local furring channel contractors in Albuquerque for personalized quotes based on your specific project.