Basic
$1,418 – $4,726 per project
1 in. PEX service line in an open trench at frost depth with tracer wire, approved tie-ins at meter and house, pressure tested
Replace/install the main water service line from the meter or curb stop to the house (typically 25-75 ft of PEX or copper, trenched), including tie-ins and permit.
Install Water Line in Anchorage, Alaska typically costs $1,668 to $5,560 per project as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Anchorage are 13.0% higher than the national average for install water line.
National average: $1,500 – $5,000 per project
$1,418 – $4,726 per project
1 in. PEX service line in an open trench at frost depth with tracer wire, approved tie-ins at meter and house, pressure tested
$1,668 – $5,560 per project
1 in. PEX service line on sand bedding with tracer wire, new full-port valve at the house, backfilled and pressure tested
$2,085 – $6,950 per project
1 in. Type K copper service line on sand bedding, sleeved foundation entry, new full-port main valve, compacted backfill
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $722 – $2,408 | job |
| Labor | labor | $625 – $2,083 | job |
| Supplies & Other | supplies | $193 – $642 | job |
| Equipment & Disposal | equipment | $128 – $428 | job |
Labor costs in Anchorage run proportionally higher than materials, which may favor material-heavy solutions.
Connect with local install water line contractors in Anchorage for personalized quotes based on your specific project.