Basic
$1.24 – $3.09 per sq ft
1-1/2 in. XPS rigid foam board (about R-7.5), fastened to the wall, seams taped

Supply and install rigid foam board (EPS/XPS/polyiso, ~1-2 in) on walls, basement or foundation, taped and fastened, materials and labor.
Foam Board Insulation in Arlington, Texas typically costs $1.45 to $3.64 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Arlington are 5.0% lower than the national average for foam board insulation.
National average: $1.50 – $3.75 per sq ft
$1.24 – $3.09 per sq ft
1-1/2 in. XPS rigid foam board (about R-7.5), fastened to the wall, seams taped
$1.45 – $3.64 per sq ft
1-1/2 in. XPS rigid foam board (about R-7.5), adhesive and fasteners, staggered joints, seams taped
$1.82 – $4.55 per sq ft
1-1/2 in. XPS rigid foam board (about R-7.5), adhesive and fasteners, staggered joints, seams taped, edges and penetrations sealed with foam
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $0.68 – $1.74 | sq ft |
| Labor | labor | $0.46 – $1.13 | sq ft |
| Supplies & Other | supplies | $0.19 – $0.46 | sq ft |
| Equipment & Disposal | equipment | $0.12 – $0.31 | sq ft |

Cut edge of grey graphite EPS rigid foam insulation board showing bead structure
Photo: Cjp24 · CC BY-SA 4.0 · Source

Foil-faced rigid foam board fastened over roof framing with wood battens
Material costs in Arlington run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local foam board insulation contractors in Arlington for personalized quotes based on your specific project.