Basic
$4.95 – $9.90 per sq ft
45-mil white TPO, mechanically attached over 1/2 in. cover board, hot-air-welded seams, standard flashings and edge metal

Install a single-ply membrane roof (TPO, PVC or EPDM) on a low-slope roof, including membrane, cover board or insulation, flashing and seams.
Membrane Roof in Arlington, Texas typically costs $5.82 to $12 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Arlington are 5.0% lower than the national average for membrane roof.
National average: $6 – $12 per sq ft
$4.95 – $9.90 per sq ft
45-mil white TPO, mechanically attached over 1/2 in. cover board, hot-air-welded seams, standard flashings and edge metal
$5.82 – $12 per sq ft
60-mil white TPO, mechanically attached over polyiso insulation board, welded seams, pre-formed corners and pipe boots
$7.28 – $15 per sq ft
60-mil white TPO fully adhered over thicker polyiso and cover board, welded seams, pre-formed corners, reinforced perimeter
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $2.78 – $5.56 | sq ft |
| Labor | labor | $1.81 – $3.61 | sq ft |
| Supplies & Other | supplies | $0.74 – $1.48 | sq ft |
| Equipment & Disposal | equipment | $0.49 – $0.99 | sq ft |
Material costs in Arlington run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local membrane roof contractors in Arlington for personalized quotes based on your specific project.