Basic
$4.12 – $9.90 per sq ft
45 mil black EPDM fully adhered after tear-off, taped seams, galvanized drip edge, standard flashings

Photo: Crownbuild · CC BY-SA 3.0 · Source
Tear off and install a fully adhered EPDM rubber membrane on a residential flat or low-slope roof, per sq ft, materials and labor.
Rubber Roof in Arlington, Texas typically costs $4.85 to $12 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Arlington are 5.0% lower than the national average for rubber roof.
National average: $5 – $12 per sq ft
$4.12 – $9.90 per sq ft
45 mil black EPDM fully adhered after tear-off, taped seams, galvanized drip edge, standard flashings
$4.85 – $12 per sq ft
60 mil black EPDM fully adhered after tear-off over a cover board, taped seams, pressure-sensitive flashings, prefinished edge metal
$6.07 – $15 per sq ft
60 mil white reflective EPDM fully adhered after tear-off over a cover board, taped seams, pressure-sensitive flashings, prefinished edge metal
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $2.32 – $5.56 | sq ft |
| Labor | labor | $1.51 – $3.61 | sq ft |
| Supplies & Other | supplies | $0.62 – $1.48 | sq ft |
| Equipment & Disposal | equipment | $0.41 – $0.99 | sq ft |
Material costs in Arlington run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local rubber roof contractors in Arlington for personalized quotes based on your specific project.