Basic
$492 – $1,969 per project
Rotted section cut out, replaced with primed pine, wood preservative on cut ends, caulked, primed and painted

Cut out and replace dry-rotted wood on exterior trim, siding, fascia or a window/door frame (non-structural, localized), treat, prime and paint.
Repair Dry Rot in Atlanta, Georgia typically costs $579 to $2,316 per project as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Atlanta are 5.0% lower than the national average for repair dry rot.
National average: $600 – $2,400 per project
$492 – $1,969 per project
Rotted section cut out, replaced with primed pine, wood preservative on cut ends, caulked, primed and painted
$579 – $2,316 per project
Rot cut back to sound wood, borate treatment, primed fir replacement back-primed, caulked, two finish coats
$724 – $2,895 per project
Rot cut back, borate and epoxy consolidant on edges, cellular PVC replacement, sill flashing where needed, two coats
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $270 – $1,080 | job |
| Labor | labor | $189 – $756 | job |
| Supplies & Other | supplies | $72 – $288 | job |
| Equipment & Disposal | equipment | $48 – $192 | job |
Close-up of dry-rotted wood at a painted door frame corner
Photo: David Schott from Redmond, Washington, USA · CC BY 2.0 · Source
Find a pro to do thisDry-rotted wood board with cracked cubical decay and a tape measure
Photo: Mätes II. · CC BY-SA 3.0 · Source
Find a pro to do thisMaterial costs in Atlanta run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local repair dry rot contractors in Atlanta for personalized quotes based on your specific project.