Basic
$1.09 – $2.63 per sq ft
#3 rebar grid at 18 in. on center, tied at alternate intersections, set on plastic chairs mid-slab

Cut, tie and place #3-#4 steel rebar grid on chairs in a residential concrete slab before the pour, per sq ft of slab, materials and labor.
Install Rebar Reinforcement in Bridgeport, Connecticut typically costs $1.29 to $3.09 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Bridgeport are 6.0% higher than the national average for install rebar reinforcement.
National average: $1.25 – $3 per sq ft
$1.09 – $2.63 per sq ft
#3 rebar grid at 18 in. on center, tied at alternate intersections, set on plastic chairs mid-slab
$1.29 – $3.09 per sq ft
#4 rebar grid at 18 in. on center, tied at every intersection, on chairs about every 3 ft, laps per bar size
$1.61 – $3.86 per sq ft
#4 rebar grid at 16 in. on center, tied at every intersection, extra edge bars, chairs about every 3 ft
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $0.55 – $1.31 | sq ft |
| Labor | labor | $0.49 – $1.20 | sq ft |
| Supplies & Other | supplies | $0.15 – $0.35 | sq ft |
| Equipment & Disposal | equipment | $0.10 – $0.23 | sq ft |
Welded steel reinforcing mesh stacked, close up
Photo: W.carter · CC BY-SA 4.0 · Source
Find a pro to do thisBundle of straight ribbed rebar bars, close up
Photo: W.carter · CC BY-SA 4.0 · Source
Find a pro to do thisLabor costs in Bridgeport run proportionally higher than materials, which may favor material-heavy solutions.
Connect with local install rebar reinforcement contractors in Bridgeport for personalized quotes based on your specific project.