Basic
$488 – $1,951 per project
Rotted section cut out, replaced with primed pine, wood preservative on cut ends, caulked, primed and painted

Cut out and replace dry-rotted wood on exterior trim, siding, fascia or a window/door frame (non-structural, localized), treat, prime and paint.
Repair Dry Rot in Colorado Springs, Colorado typically costs $574 to $2,296 per project as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Colorado Springs are 4.0% lower than the national average for repair dry rot.
National average: $600 – $2,400 per project
$488 – $1,951 per project
Rotted section cut out, replaced with primed pine, wood preservative on cut ends, caulked, primed and painted
$574 – $2,296 per project
Rot cut back to sound wood, borate treatment, primed fir replacement back-primed, caulked, two finish coats
$717 – $2,870 per project
Rot cut back, borate and epoxy consolidant on edges, cellular PVC replacement, sill flashing where needed, two coats
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $259 – $1,037 | job |
| Labor | labor | $200 – $798 | job |
| Supplies & Other | supplies | $69 – $276 | job |
| Equipment & Disposal | equipment | $46 – $184 | job |
Close-up of dry-rotted wood at a painted door frame corner
Photo: David Schott from Redmond, Washington, USA · CC BY 2.0 · Source
Find a pro to do thisDry-rotted wood board with cracked cubical decay and a tape measure
Photo: Mätes II. · CC BY-SA 3.0 · Source
Find a pro to do thisConnect with local repair dry rot contractors in Colorado Springs for personalized quotes based on your specific project.