Basic
$16 – $37 per sq ft
Natural sawn-back ashlar thin veneer in a common local stone, random rectangular pattern, gray mortar joints, set over scratch coat
Rendering: BuildX
Find a pro to do this
Install natural ashlar-pattern cut stone veneer or wall face, set in mortar on a prepared substrate, per square foot of wall face.
Install Ashlar Stone in Des Moines, Iowa typically costs $19 to $43 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Des Moines are 3.0% lower than the national average for install ashlar stone.
National average: $20 – $45 per sq ft
$16 – $37 per sq ft
Natural sawn-back ashlar thin veneer in a common local stone, random rectangular pattern, gray mortar joints, set over scratch coat
Rendering: BuildX
Find a pro to do this$19 – $43 per sq ft
Natural ashlar thin veneer in two to three course heights, split face, tooled mortar joints, set over scratch coat
Rendering: BuildX
Find a pro to do this$24 – $54 per sq ft
Dressed natural ashlar thin veneer with squared, tightly fitted edges in even courses, narrow recessed joints, color-blended mortar
Photo: Jorge Láscar from Australia · CC BY 2.0 · Source
Find a pro to do this| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $8.46 – $19 | sq ft |
| Labor | labor | $7 – $16 | sq ft |
| Supplies & Other | supplies | $2.26 – $5.08 | sq ft |
| Equipment & Disposal | equipment | $1.50 – $3.38 | sq ft |
Coursed rough-cut stone masonry wall beside a door opening
Photo: Xemenendura · CC BY-SA 4.0 · Source
Find a pro to do thisLabor costs in Des Moines run proportionally higher than materials, which may favor material-heavy solutions.
Connect with local install ashlar stone contractors in Des Moines for personalized quotes based on your specific project.