Basic
$7.26 – $14 per sq ft
4-in. concrete with local gray pea gravel exposed by surface retarder and wash, wire mesh, one coat of sealer

Pour a 4-5 in. exposed aggregate concrete driveway on prepared base, including forms, reinforcement, exposure wash and sealing.
Install Exposed Aggregate Driveway in Fresno, California typically costs $8.54 to $16 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Fresno are 8.0% higher than the national average for install exposed aggregate driveway.
National average: $8 – $15 per sq ft
$7.26 – $14 per sq ft
4-in. concrete with local gray pea gravel exposed by surface retarder and wash, wire mesh, one coat of sealer
$8.54 – $16 per sq ft
4-5 in. concrete with rebar grid, rounded river-rock aggregate in mixed tones, even exposure, two coats of sealer
$11 – $20 per sq ft
5-in. concrete with rebar, decorative aggregate blend seeded into the surface, smooth troweled border band, two sealer coats
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $3.78 – $7.09 | sq ft |
| Labor | labor | $3.08 – $5.78 | sq ft |
| Supplies & Other | supplies | $1.01 – $1.89 | sq ft |
| Equipment & Disposal | equipment | $0.67 – $1.26 | sq ft |
Close-up of exposed aggregate concrete surface with small pebbles
Photo: andres musta · CC BY 2.0 · Source
Find a pro to do thisLabor costs in Fresno run proportionally higher than materials, which may favor material-heavy solutions.
Connect with local install exposed aggregate driveway contractors in Fresno for personalized quotes based on your specific project.