Basic
$0.36 – $1 per sq ft
6x6 W1.4 mesh flattened from rolls, set on plastic chairs about 3-4 ft apart, lapped one square and tied

Supply and place 6x6 W1.4 welded wire mesh on chairs, lapped and tied, in a residential slab before the pour (added cost per sq ft of slab).
Install Wire Mesh For Concrete in Fresno, California typically costs $0.43 to $1.17 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Fresno are 8.0% higher than the national average for install wire mesh for concrete.
National average: $0.40 – $1.10 per sq ft
$0.36 – $1 per sq ft
6x6 W1.4 mesh flattened from rolls, set on plastic chairs about 3-4 ft apart, lapped one square and tied
$0.43 – $1.17 per sq ft
6x6 W1.4 mesh in flat sheets on 1-1/2 in. plastic chairs, laps of one full square plus 2 in., wire-tied
$0.53 – $1.47 per sq ft
6x6 W1.4 flat sheets on closely spaced chairs, laps tied at every crossing, mesh height checked across the slab before pour
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $0.19 – $0.53 | sq ft |
| Labor | labor | $0.15 – $0.42 | sq ft |
| Supplies & Other | supplies | $0.05 – $0.14 | sq ft |
| Equipment & Disposal | equipment | $0.03 – $0.09 | sq ft |
Rusty welded steel reinforcing mesh sheets stacked flat, close up
Photo: W.carter · CC BY-SA 4.0 · Source
Find a pro to do thisLabor costs in Fresno run proportionally higher than materials, which may favor material-heavy solutions.
Connect with local install wire mesh for concrete contractors in Fresno for personalized quotes based on your specific project.