Basic
$6.27 – $12 per sq ft
4-in. concrete with local gray pea gravel exposed by surface retarder and wash, wire mesh, one coat of sealer

Pour a 4-5 in. exposed aggregate concrete driveway on prepared base, including forms, reinforcement, exposure wash and sealing.
Install Exposed Aggregate Driveway in Jacksonville, Florida typically costs $7.37 to $14 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Jacksonville are 9.0% lower than the national average for install exposed aggregate driveway.
National average: $8 – $15 per sq ft
$6.27 – $12 per sq ft
4-in. concrete with local gray pea gravel exposed by surface retarder and wash, wire mesh, one coat of sealer
$7.37 – $14 per sq ft
4-5 in. concrete with rebar grid, rounded river-rock aggregate in mixed tones, even exposure, two coats of sealer
$9.22 – $17 per sq ft
5-in. concrete with rebar, decorative aggregate blend seeded into the surface, smooth troweled border band, two sealer coats
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $3.46 – $6.48 | sq ft |
| Labor | labor | $2.38 – $4.46 | sq ft |
| Supplies & Other | supplies | $0.92 – $1.73 | sq ft |
| Equipment & Disposal | equipment | $0.61 – $1.15 | sq ft |
Close-up of exposed aggregate concrete surface with small pebbles
Photo: andres musta · CC BY 2.0 · Source
Find a pro to do thisMaterial costs in Jacksonville run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local install exposed aggregate driveway contractors in Jacksonville for personalized quotes based on your specific project.