Basic
$1,175 – $3,916 per project
1 in. PEX service line in an open trench at frost depth with tracer wire, approved tie-ins at meter and house, pressure tested
Replace/install the main water service line from the meter or curb stop to the house (typically 25-75 ft of PEX or copper, trenched), including tie-ins and permit.
Install Water Line in Jacksonville, Florida typically costs $1,382 to $4,608 per project as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Jacksonville are 9.0% lower than the national average for install water line.
National average: $1,500 – $5,000 per project
$1,175 – $3,916 per project
1 in. PEX service line in an open trench at frost depth with tracer wire, approved tie-ins at meter and house, pressure tested
$1,382 – $4,608 per project
1 in. PEX service line on sand bedding with tracer wire, new full-port valve at the house, backfilled and pressure tested
$1,728 – $5,759 per project
1 in. Type K copper service line on sand bedding, sleeved foundation entry, new full-port main valve, compacted backfill
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $648 – $2,160 | job |
| Labor | labor | $446 – $1,488 | job |
| Supplies & Other | supplies | $173 – $576 | job |
| Equipment & Disposal | equipment | $115 – $384 | job |
Material costs in Jacksonville run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local install water line contractors in Jacksonville for personalized quotes based on your specific project.