Basic
$5.20 – $10 per sq ft
45-mil white TPO, mechanically attached over 1/2 in. cover board, hot-air-welded seams, standard flashings and edge metal

Install a single-ply membrane roof (TPO, PVC or EPDM) on a low-slope roof, including membrane, cover board or insulation, flashing and seams.
Membrane Roof in Philadelphia, Pennsylvania typically costs $6.11 to $12 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Philadelphia are 4.0% higher than the national average for membrane roof.
National average: $6 – $12 per sq ft
$5.20 – $10 per sq ft
45-mil white TPO, mechanically attached over 1/2 in. cover board, hot-air-welded seams, standard flashings and edge metal
$6.11 – $12 per sq ft
60-mil white TPO, mechanically attached over polyiso insulation board, welded seams, pre-formed corners and pipe boots
$7.64 – $15 per sq ft
60-mil white TPO fully adhered over thicker polyiso and cover board, welded seams, pre-formed corners, reinforced perimeter
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $2.62 – $5.24 | sq ft |
| Labor | labor | $2.33 – $4.66 | sq ft |
| Supplies & Other | supplies | $0.70 – $1.40 | sq ft |
| Equipment & Disposal | equipment | $0.47 – $0.93 | sq ft |
Labor costs in Philadelphia run proportionally higher than materials, which may favor material-heavy solutions.
Connect with local membrane roof contractors in Philadelphia for personalized quotes based on your specific project.