Basic
$4.80 – $9.61 per sq ft
45-mil white TPO, mechanically attached over 1/2 in. cover board, hot-air-welded seams, standard flashings and edge metal

Install a single-ply membrane roof (TPO, PVC or EPDM) on a low-slope roof, including membrane, cover board or insulation, flashing and seams.
Membrane Roof in Virginia Beach, Virginia typically costs $5.65 to $11 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Virginia Beach are 7.0% lower than the national average for membrane roof.
National average: $6 – $12 per sq ft
$4.80 – $9.61 per sq ft
45-mil white TPO, mechanically attached over 1/2 in. cover board, hot-air-welded seams, standard flashings and edge metal
$5.65 – $11 per sq ft
60-mil white TPO, mechanically attached over polyiso insulation board, welded seams, pre-formed corners and pipe boots
$7.07 – $14 per sq ft
60-mil white TPO fully adhered over thicker polyiso and cover board, welded seams, pre-formed corners, reinforced perimeter
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $2.62 – $5.24 | sq ft |
| Labor | labor | $1.87 – $3.74 | sq ft |
| Supplies & Other | supplies | $0.70 – $1.40 | sq ft |
| Equipment & Disposal | equipment | $0.47 – $0.93 | sq ft |
Material costs in Virginia Beach run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local membrane roof contractors in Virginia Beach for personalized quotes based on your specific project.