Photo: Dietmar Rabich · CC BY-SA 4.0 · Source
Solid wood or wood-veneer wall paneling (T&G, shiplap, beadboard) supplied and installed.
Wood Paneling typically costs $7 to $16 per sq ft (national average as of 2026). Most straightforward jobs start near $7 per sq ft. Final pricing depends on material quality, project scope, local labor rates, and site conditions. Use our free calculator below for a personalized estimate.
Quality Level
Estimated Total Cost
200 sq ft • Standard Quality
National average — enter your ZIP for local prices.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
$5.95 – $14 per sq ft
Wood-veneer beadboard sheet panels, glued and brad-nailed over the wall, cap and base trim
$7 – $16 per sq ft
1x6 knotty pine tongue-and-groove boards, blind-nailed over the wall, matching trim
$8.75 – $20 per sq ft
1x6 clear cedar tongue-and-groove boards with even joints, sanded, matching cedar trim
| Component | Category | Low | High | Unit |
|---|---|---|---|---|
| Materials | material | $3.15 | $7.20 | sq ft |
| Labor | labor | $2.45 | $5.60 | sq ft |
| Supplies & Other | supplies | $0.84 | $1.92 | sq ft |
| Equipment & Disposal | equipment | $0.56 | $1.28 | sq ft |
Solid wood or wood-veneer wall paneling (T&G, shiplap, beadboard) supplied and installed.
Typical wood paneling pricing range per sq ft.
Starting price $7 per sq ft. National average as of 2026. This is a directional range. Final pricing depends on scope, materials, access, and local labor rates.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
Knotty pine tongue-and-groove wall paneling with hooks
Photo: Dietmar Rabich · CC BY-SA 4.0 · Source
Find a pro to do thisWood Paneling usually lands between $7 to $16 per sq ft. That range reflects current national calculator data after materials, labor, supplies, equipment, and disposal are rolled together. Your real quote will move based on quantity, site conditions, finish level, and contractor availability in your ZIP code.
Solid wood or wood-veneer wall paneling (T&G, shiplap, beadboard) supplied and installed.
Material selections can move the budget faster than anything else, with current material allowances landing around $3.15 to $7.20 per sq ft.
Labor complexity is the next major swing factor, with installation or trade time currently averaging $2.45 to $5.60 per sq ft.
Smaller consumables still matter, because supplies are contributing about $0.84 to $1.92 per sq ft.
Specialty tools, access equipment, cleanup, and disposal can add another $0.56 to $1.28 per sq ft.
Scope changes, premium finishes, difficult access, demolition, and permit requirements can push the total toward the high end of the range. Cleaner access, standard finishes, and bundled work often keep the job closer to the low end.
Get multiple itemized bids, ask contractors to separate materials from labor, and confirm what is included before you compare totals. Scheduling during a slower season and bundling adjacent work can also reduce mobilization costs.
Keep specifications tight before work starts. Change orders are one of the fastest ways to blow past the original budget, especially when material lead times or specialty trades are involved.
DIY can make sense when you already own the tools, understand the prep requirements, and can tolerate schedule risk. Hiring a pro is usually the better move when mistakes would affect finish quality, code compliance, waterproofing, structural performance, or warranty coverage.
BuildX Pro researches and reviews the national price range for Wood Paneling, then adjusts it to your ZIP code for local labor and material costs using the public data below. Last checked Nov 2026.
View local pricing for wood paneling across 51 states.
Find contractors who list this service and ask for a written quote.
Cost guides for property owners. Contractor ID for the shops who do the work.
Use the calculator range of $7 to $16 per sq ft as your baseline, then compare that against the time, tool rentals, material waste, and rework risk you would take on by doing the project yourself.
Most wood paneling jobs start with site review, measurements, and material confirmation. From there the crew usually handles preparation, core installation or repair work, cleanup, and a final walkthrough to confirm the finished scope matches the quote.
Ask each contractor how they handle protection of adjacent finishes, debris removal, and change approvals. Those three points tend to separate a clean project from an expensive headache.
See how wood paneling looks in each style, with photos of real projects by working designers.
Miami mixes three local traditions: 1930s Tropical Deco, the 1950s Miami Modern (MiMo) of Morris Lapidus, and today's tropical modern, where clean geometry meets deep overhangs, glass and lush planting. Interiors stay cool and open to the outside, with terrazzo, white plaster, bold color accents and glossy finishes.
Work by Miami designers first, then the styles Miami draws from.
We don't know your city yet, so this shows Miami.
Modern living room
Photo: bc2 interiors · Profile
Contemporary living room
Photo: 2112 Design Studio · Profile
Art Deco bedroom
Photo: Natalia Neverko Design
Mid-Century Modern living room
Photo: Assure Interiors · Profile
Mid-Century Modern living room
Photo: Mason Meyer Design · Profile
Minimalist interior
Photo: The Habitat Collective · Profile
Bohemian bedroom
Photo: Mason Meyer Design · Profile
Modern living room
Photo: Mutuus Studio · Profile
Modern interior
Photo: Seattle Scandinavian · Profile