Basic
$3.95 – $7.89 per sq ft
45-mil black EPDM membrane fully adhered after one-layer tear-off, taped seams, standard flashings and drip edge

Photo: Crownbuild · CC BY-SA 3.0 · Source
Install a fully adhered or mechanically attached EPDM rubber membrane on a low-slope roof, including tear-off of one layer and flashing.
EPDM Roof in Memphis, Tennessee typically costs $4.64 to $9.29 per sq ft as of 2026. Prices reflect local labor and material rates. Use our calculator below for a detailed, ZIP-code-adjusted estimate.
Prices in Memphis are 8.0% lower than the national average for epdm roof.
National average: $5 – $10 per sq ft
$3.95 – $7.89 per sq ft
45-mil black EPDM membrane fully adhered after one-layer tear-off, taped seams, standard flashings and drip edge
$4.64 – $9.29 per sq ft
60-mil black EPDM fully adhered over a new cover board, seam tape, pressure-sensitive flashings and metal edge trim
$5.80 – $12 per sq ft
60-mil reinforced EPDM fully adhered over a cover board, wider seam tape, preformed corners and pipe boots, heavier edge metal
| Component | Category | Price Range | Unit |
|---|---|---|---|
| Materials | material | $2.16 – $4.32 | sq ft |
| Labor | labor | $1.52 – $3.05 | sq ft |
| Supplies & Other | supplies | $0.58 – $1.15 | sq ft |
| Equipment & Disposal | equipment | $0.38 – $0.77 | sq ft |
Large flat roof finished with an EPDM rubber membrane and upstand edge
Photo: Crownbuild · CC BY-SA 3.0 · Source
Find a pro to do thisFlat roof covered with EPDM membrane, edge trim and a ladder
Photo: KVDP · Public domain · Source
Find a pro to do thisMaterial costs in Memphis run proportionally higher than labor, which may favor labor-intensive approaches.
Connect with local epdm roof contractors in Memphis for personalized quotes based on your specific project.