Photo: Brian C Murray · CC BY-SA 4.0 · Source
Strip or sand, stain and clear-coat both faces and edges of one standard wood door, hardware removed and replaced.
Refinish Door typically costs $200 to $550 each (national average as of 2026). Most straightforward jobs start near $200 each. Final pricing depends on material quality, project scope, local labor rates, and site conditions. Use our free calculator below for a personalized estimate.
Quality Level
Estimated Total Cost
1 unit(s) • Standard Quality
National average — enter your ZIP for local prices.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
Tell us about your project and we'll send it to contractors near you who do this work.
$170 – $468 each
Sanded to bare wood on both faces and edges, one coat of stain, two coats of polyurethane, hardware removed and reinstalled
$200 – $550 each
Chemically stripped and sanded including panel profiles, stain, sanding sealer, two coats of satin polyurethane, hardware reinstalled
$250 – $688 each
Fully stripped and hand-sanded, wood conditioner, matched stain, sealer and three sprayed coats of clear finish, hardware cleaned
| Component | Category | Low | High | Unit |
|---|---|---|---|---|
| Materials | material | $90 | $248 | each |
| Labor | labor | $70 | $192 | each |
| Supplies & Other | supplies | $24 | $66 | each |
| Equipment & Disposal | equipment | $16 | $44 | each |
Strip or sand, stain and clear-coat both faces and edges of one standard wood door, hardware removed and replaced.
Typical refinish door pricing range each.
Starting price $200 each. National average as of 2026. This is a directional range. Final pricing depends on scope, materials, access, and local labor rates.
Estimates are approximate and vary by location, project scope, and current market conditions. Contact a local contractor for an accurate quote.
Stained wood double front door with arched glass top after refinishing
Photo: Brian C Murray · CC BY-SA 4.0 · Source
Find a pro to do thisRefinish Door usually lands between $200 to $550 each. That range reflects current national calculator data after materials, labor, supplies, equipment, and disposal are rolled together. Your real quote will move based on quantity, site conditions, finish level, and contractor availability in your ZIP code.
Strip or sand, stain and clear-coat both faces and edges of one standard wood door, hardware removed and replaced.
Material selections can move the budget faster than anything else, with current material allowances landing around $90 to $248 each.
Labor complexity is the next major swing factor, with installation or trade time currently averaging $70 to $192 each.
Smaller consumables still matter, because supplies are contributing about $24 to $66 each.
Specialty tools, access equipment, cleanup, and disposal can add another $16 to $44 each.
Scope changes, premium finishes, difficult access, demolition, and permit requirements can push the total toward the high end of the range. Cleaner access, standard finishes, and bundled work often keep the job closer to the low end.
Get multiple itemized bids, ask contractors to separate materials from labor, and confirm what is included before you compare totals. Scheduling during a slower season and bundling adjacent work can also reduce mobilization costs.
Keep specifications tight before work starts. Change orders are one of the fastest ways to blow past the original budget, especially when material lead times or specialty trades are involved.
DIY can make sense when you already own the tools, understand the prep requirements, and can tolerate schedule risk. Hiring a pro is usually the better move when mistakes would affect finish quality, code compliance, waterproofing, structural performance, or warranty coverage.
Use the calculator range of each as your baseline, then compare that against the time, tool rentals, material waste, and rework risk you would take on by doing the project yourself.
View local pricing for refinish door across 51 states.
Find contractors who list this service and ask for a written quote.
Cost guides for property owners. Contractor ID for the shops who do the work.
Most refinish door jobs start with site review, measurements, and material confirmation. From there the crew usually handles preparation, core installation or repair work, cleanup, and a final walkthrough to confirm the finished scope matches the quote.
Ask each contractor how they handle protection of adjacent finishes, debris removal, and change approvals. Those three points tend to separate a clean project from an expensive headache.