Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 48 of 199 services in concrete & masonry

Permeable Paver

concrete & masonry

Supply and install permeable pavers with open-graded stone base and edge restraint (patio/driveway), per sq ft; old paving demolition extra.

$10 - $30 per sq ft

Polished Concrete

concrete & masonry

Grind, densify and polish an existing concrete slab floor to a standard sheen, optionally with stain or dye.

$3 - $10 per sq ft

Polyurethane Concrete Sealer

concrete & masonry

Clean and apply a polyurethane sealer coat to an existing concrete floor, garage or patio by a contractor.

$1.35 - $2.50 per sq ft

Pool Paver

concrete & masonry

Supply and install pool-deck pavers (concrete, travertine or porcelain) on compacted base with edge restraint, per sq ft; coping replacement and drainage extra.

$12 - $30 per sq ft

Power Wash a Patio

concrete & masonry

Pressure wash a concrete or paver patio (about 200-500 sq ft), pre-treat stains and rinse.

$0.20 - $0.50 per sq ft

Power Wash Brick

concrete & masonry

Power Wash Brick: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$0.40 - $0.51 per sq ft

Power Wash Driveway

concrete & masonry

Pressure wash a concrete driveway with surface cleaner, pre-treating light oil stains and rinsing.

$0.15 - $0.40 per sq ft

Pressure Wash a Driveway

concrete & masonry

Professional pressure washing of a concrete or asphalt residential driveway, labor, equipment and detergent included.

$0.15 - $0.40 per sq ft

Pressure Wash Concrete

concrete & masonry

Professional pressure washing of residential concrete flatwork (patio, sidewalk, slab), labor and equipment included.

$0.15 - $0.40 per sq ft

Quarry Stone Paver

concrete & masonry

Install a natural quarried stone (flagstone/bluestone) paver patio or walkway on a compacted base, dry-laid, including materials and labor.

$15 - $32 per sq ft

Remove Concrete Slab

concrete & masonry

Break up, load out and dispose of an existing concrete slab (unreinforced to lightly reinforced); new pour not included.

$2 - $6 per sq ft

Repair Brick

concrete & masonry

Repair a localized area of damaged brick wall or veneer (replace cracked or spalled bricks and repoint surrounding mortar, roughly 10-50 sq ft).

$400 - $1,500 each

Repair Concrete

concrete & masonry

Repair damaged residential concrete flatwork (patch spalls and holes, then resurface or replace small failed sections), priced per sq ft of repaired area.

$4 - $12 per sq ft

Repair Cracked Concrete

concrete & masonry

Clean, rout and fill cracks in a concrete slab, driveway or walk with epoxy, polyurethane or flexible sealant, priced per linear ft of crack.

$4 - $12 per linear ft

Repair Stone

concrete & masonry

Spot repair of natural stone surfaces (fill and color-match chips, cracks or holes in stone tile, countertop or veneer, re-polish/seal the area); not full restoration.

$200 - $700 each

Repair Stucco

concrete & masonry

Repair Stucco: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$48 - $58 per sq ft

Repair Stucco Crack

concrete & masonry

Repair Stucco Crack: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$19 - $23 per linear ft

Resin Bonded Driveway

concrete & masonry

Install a resin-bound or resin-bonded aggregate driveway surface over a sound base, per sq ft, materials and labor, excluding major excavation.

$11 - $17 per sq ft

Resin Bonded Patio

concrete & masonry

Resin-bound/bonded aggregate patio surface installed over a prepared base (materials and labor, including excavation/site prep typical of resin paving).

$11 - $17 per sq ft

Retaining Wall

concrete & masonry

Retaining Wall: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$35 - $49 per sq ft

Retaining Wall Block

concrete & masonry

Build a segmental concrete block retaining wall up to about 4 ft with gravel base, drainage aggregate and caps, per sq ft of wall face, materials and labor.

$18 - $40 per sq ft

Sandstone Paver

concrete & masonry

Install a sandstone paver patio or walkway on a compacted gravel and sand base with edging, per sq ft, materials and labor.

$18 - $30 per sq ft

Screen In Patio

concrete & masonry

Enclose an existing patio with screen walls (aluminum or wood frame, mesh, door), per sq ft of patio area; existing roof/cover assumed.

$8 - $22 per sq ft

Set Concrete Formwork

concrete & masonry

Build, set, brace and strip wood forms for concrete slabs, footings or low walls, per sq ft of form contact area.

$5 - $12 per sq ft

Sidewalk Paver

concrete & masonry

Paver (brick/concrete/stone) walkway installed over a compacted base with sand joints, materials and labor per sq ft; grading and old-surface removal extra.

$10 - $20 per sq ft

Single Color Stamped Concrete

concrete & masonry

Pour and stamp a new 4 in. concrete patio or walkway with one pattern and one integral or broadcast color plus release and sealer, per sq ft.

$8 - $18 per sq ft

Slate Patio

concrete & masonry

Slate paving-stone patio installed on a prepared base (excavation, gravel/sand or mortar bed, joints).

$15 - $40 per sq ft

Stacked Stone Veneer

concrete & masonry

Stacked Stone Veneer: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$30 - $38 per sq ft

Stacked Stone Wall

concrete & masonry

Build a free-standing stacked stone wall (materials and labor, per sq ft of wall face); footings, drainage and veneer-over-block applications cost less/differ.

$35 - $60 per sq ft

Stained Concrete Driveway

concrete & masonry

New poured concrete driveway with integral color or acid/water-based stain and sealer, priced per square foot.

$8 - $16 per sq ft

Stained Concrete Patio

concrete & masonry

New concrete patio poured and finished with acid or water-based stain and sealer.

$8 - $18 per sq ft

Stained Concrete Pool Deck

concrete & masonry

New concrete pool deck poured and colored with stain and sealer.

$8 - $18 per sq ft

Stained Concrete Slab

concrete & masonry

Clean, acid- or water-based stain and seal an existing interior concrete slab floor (one or two colors).

$3 - $10 per sq ft

Stained Concrete Walkway

concrete & masonry

New concrete walkway poured then acid/water-stained and sealed (materials and labor per sq ft); removing an old walkway and grading extra.

$10 - $20 per sq ft

Stamped Concrete

concrete & masonry

New stamped (patterned and colored) concrete slab for a patio, walkway or driveway, poured, stamped and sealed, priced per square foot.

$8 - $22 per sq ft

Stamped Concrete Driveway

concrete & masonry

New stamped and colored concrete driveway (4-6 in. slab, base prep, reinforcement, stamping, sealer) priced per square foot.

$12 - $22 per sq ft

Stamped Concrete Patio

concrete & masonry

New stamped concrete patio slab, poured, stamped, colored and sealed, priced per square foot.

$9 - $20 per sq ft

Stamped Concrete Pool Deck

concrete & masonry

New stamped concrete pool deck around an in-ground pool, poured, stamped, colored and sealed with slip-resistant finish.

$12 - $22 per sq ft

Stamped Concrete Walkway

concrete & masonry

New stamped (patterned) and colored concrete walkway, materials and labor per sq ft; excavation, gravel base and old-slab removal extra.

$10 - $20 per sq ft

Stone Driveway

concrete & masonry

Natural stone paver driveway (bluestone, travertine, granite, flagstone or cobblestone) set on a compacted driveway base, materials and labor, per square foot of driveway.

$20 - $45 per sq ft

Stone Retaining Wall

concrete & masonry

Build a natural stone (dry-stack or mortared) retaining wall up to about 4 ft tall, priced per sq ft of wall face, including base, drainage aggregate and labor; engineering for walls over 4 ft extra.

$35 - $90 per sq ft

Stone Siding

concrete & masonry

Natural stone siding (full-bed or natural thin stone) installed on exterior walls by a mason, materials and labor, per square foot of wall.

$15 - $45 per sq ft

Stone Veneer

concrete & masonry

Stone Veneer: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$19 - $34 per sq ft

Stone Veneer Siding

concrete & masonry

Manufactured or natural thin stone veneer adhered over lath and moisture barrier on exterior walls, materials and labor, per square foot of wall.

$12 - $30 per sq ft

Stone Walkway

concrete & masonry

Supply and install a natural-stone paver walkway (base prep, gravel/sand bed, stones, edging), materials and labor per sq ft of path.

$16 - $35 per sq ft

Stone Wall

concrete & masonry

Build a natural stone garden or retaining wall (dry-stack or mortared), per sq ft of wall face, including base and labor.

$30 - $60 per sq ft

Stucco Siding

concrete & masonry

Traditional three-coat cement stucco applied over building paper and metal lath on exterior walls, materials and labor, per square foot of wall.

$7 - $14 per sq ft

Synthetic Stucco

concrete & masonry

Synthetic stucco (EIFS): foam insulation board, reinforced base coat with mesh and acrylic finish coat applied on exterior walls, per square foot of wall.

$7 - $16 per sq ft