Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 48 of 116 services in roofing

3 Layer Torch Down Roof

roofing

Install a 3-ply torch-applied modified bitumen flat/low-slope roof (base, ply and granulated cap), materials and labor, excluding deck repair.

$5 - $9 per sq ft

Aluminum Fascia

roofing

Aluminum Fascia: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$11 - $20 per linear ft

Aluminum Gutter

roofing

Supply and install aluminum gutter (seamed or seamless) with standard downspouts, materials and labor.

$7 - $14 per linear ft

Aluminum Roof

roofing

Tear off and install an aluminum standing-seam or panel roof on a typical house, including underlayment and flashing.

$6 - $14 per sq ft

Aluminum Shingle Roof

roofing

Install interlocking aluminum shingle roofing on a typical house, including tear-off, underlayment and flashing.

$9 - $16 per sq ft

Aluminum Soffit

roofing

Aluminum Soffit: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$10 - $19 per linear ft

Asphalt Shingle Roof

roofing

Asphalt Shingle Roof: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$5.09 - $6.66 per sq ft

Built Up Roof

roofing

Install a new multi-ply built-up (tar and gravel) flat roof over an existing deck, per square foot, tear-off extra.

$4 - $9 per sq ft

Cedar Roof

roofing

Supply and install a cedar shingle or shake roof over an existing roof deck, per square foot of roof, tear-off extra.

$6 - $14 per sq ft

Cedar Shake Roof

roofing

Supply and install a hand-split or taper-sawn cedar shake roof over an existing deck, per square foot of roof, tear-off extra.

$7 - $15 per sq ft

Cedar Shingle Roof

roofing

Supply and install sawn cedar shingle roofing over an existing deck, per square foot of roof, tear-off extra.

$5.50 - $11 per sq ft

Cedar Shingle Siding

roofing

Supply and install cedar shingle siding on exterior walls, per square foot of wall, tear-off extra.

$5 - $16 per sq ft

Clay Tile Roof

roofing

Tear-off and install a clay tile roof (Spanish/barrel/flat clay tile with underlayment), per sq ft of roof area.

$10 - $22 per sq ft

Clean a Cedar Shake Roof

roofing

Professional low-pressure/soft-wash cleaning of a cedar shake roof (moss and algae removal), per sq ft of roof; preservative treatment extra.

$0.35 - $0.75 per sq ft

Clean a Roof

roofing

Soft-wash cleaning of a residential asphalt, metal or tile roof to remove algae, moss and stains, priced per square foot of roof surface.

$0.30 - $0.70 per sq ft

Clean Roof Gutters

roofing

Professional cleaning of roof gutters and downspout openings, priced per linear foot of gutter (one- to two-story home).

$0.80 - $2.50 per linear ft

Clean Roof Shingles

roofing

Soft-wash cleaning of an asphalt shingle roof to remove algae, moss and stains.

$0.20 - $0.60 per sq ft

Clean Snow From a Roof

roofing

Remove snow from a residential roof by shoveling or roof rake (excluding ice dam steaming), priced per square foot of roof area.

$0.20 - $0.50 per sq ft

Clean Soffit

roofing

Soft-wash cleaning of exterior soffit (and adjoining fascia) panels to remove dirt, mildew and cobwebs.

$0.50 - $1.50 per sq ft

Clean Tile Roof

roofing

Soft-wash cleaning of a clay or concrete tile roof to remove algae, moss and stains.

$0.25 - $0.65 per sq ft

Clear Downspout

roofing

Clear one clogged gutter downspout (flush or snake, verify drainage), standalone or with a gutter visit.

$50 - $125 each

Clear Roof Debris

roofing

Clearing leaves, branches and loose debris from a residential roof with blowers and hand tools (no washing).

$150 - $400 per project

Composite Roof

roofing

Install synthetic/composite polymer shingles (slate or shake look) on a residential roof, per sq ft of roof.

$6 - $12 per sq ft

Composition Roof

roofing

Composition Roof: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$6.20 - $8.02 per sq ft

Composition Shingle Roof

roofing

Tear-off and replace with composition (asphalt fiberglass) architectural shingles, per sq ft of roof area.

$4 - $7.50 per sq ft

Concrete Curb And Gutter

roofing

Formed and poured concrete curb and gutter (curb profile plus gutter pan), materials and labor, per linear foot.

$25 - $50 per linear ft

Concrete Tile Roof

roofing

Tear-off and install a concrete tile roof with underlayment, per sq ft of roof area.

$8 - $17 per sq ft

Copper Gutter

roofing

Install copper half-round or K-style gutters with downspouts and hangers, per linear ft.

$20 - $40 per linear ft

Copper Roof

roofing

Install a copper roof (standing-seam panels or copper shingles) with underlayment, per sq ft of roof.

$14 - $30 per sq ft

Dimensional Shingle Roof

roofing

Install a dimensional (architectural) asphalt shingle roof per sq ft of roof surface with underlayment and flashing, typical single-layer tear-off.

$4.50 - $8 per sq ft

EPDM Roof

roofing

Install a fully adhered or mechanically attached EPDM rubber membrane on a low-slope roof, including tear-off of one layer and flashing.

$5 - $10 per sq ft

Fascia

roofing

Remove damaged fascia board and install new wood, vinyl, aluminum-wrapped or PVC fascia along the roof edge, labor included.

$7 - $20 per linear ft

Foam Roof

roofing

Spray polyurethane foam (SPF) roof with elastomeric topcoat on a low-slope roof, materials and labor per sq ft; tear-off and deck repair extra.

$3.50 - $7 per sq ft

Frame Skylight Opening

roofing

Cut and frame one roof/ceiling opening for a skylight (headers, doubled rafters, light-shaft framing), skylight unit and roofing excluded.

$500 - $1,500 each

Frame Soffit

roofing

Frame Soffit: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$20 - $34 per linear ft

Galvalume Roof

roofing

Tear-off and install a residential Galvalume steel roof (exposed-fastener panels to standing seam), per sq ft of roof area, materials and labor.

$7 - $14 per sq ft

Galvanized Metal Roof

roofing

Install a residential galvanized steel panel roof (mostly exposed-fastener corrugated or ribbed), per sq ft of roof area, materials and labor.

$5 - $12 per sq ft

Gutter Guard

roofing

Gutter Guard: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$8 - $16 per linear ft

Inspect Roof

roofing

Professional inspection of one residential roof (surface, flashing, gutters, attic check) with written report; certification and repairs excluded.

$150 - $500 each

Install Aluminum Fascia

roofing

Install Aluminum Fascia: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$6 - $20 per linear ft

Install Aluminum Soffit

roofing

Install Aluminum Soffit: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$7 - $20 per linear ft

Install Asphalt Shingle Roof

roofing

Install Asphalt Shingle Roof: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$3.49 - $16 per sq ft

Install Built Up Roofing

roofing

Install Built Up Roofing: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$7.91 - $9.83 per sq ft

Install Composition Roof

roofing

Install Composition Roof: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$4 - $18 per sq ft

Install Concrete Curb And Gutter

roofing

Formed and poured concrete curb and gutter (curb profile plus gutter pan), materials and labor, per linear foot.

$25 - $50 per linear ft

Install Downspout Extension

roofing

Extend a gutter downspout away from the foundation with rigid pipe (above ground or shallow-buried to a pop-up), per linear foot of extension.

$8 - $30 per linear ft

Install Fascia Boards

roofing

Install Fascia Boards: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$8.53 - $13 per linear ft

Install Foam Roof

roofing

Spray polyurethane foam (SPF) roof with elastomeric topcoat on a low-slope roof, materials and labor per sq ft; tear-off and deck repair extra.

$3.50 - $7 per sq ft