Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 48 of 559 services in general

Resin Bonded Pathway

general

Install a resin-bound or resin-bonded garden path or walkway (about 100-250 sq ft) over a prepared base, per sq ft, materials and labor.

$10 - $20 per sq ft

Restore Power

general

Electrician service call to diagnose and restore lost power in part or all of a house (tripped/failed breaker, blown fuse, loose connection), not a utility outage or panel replacement.

$150 - $500 each

Resurface Wall Or Ceiling

general

Skim-coat or resurface existing drywall/plaster walls or ceiling to a smooth paint-ready finish (patch, skim, sand), per sq ft of surface.

$1.50 - $4 per sq ft

Return Air Plenum

general

Supply and install one return-air plenum box (sheet metal, sealed to the furnace/air handler); return-duct changes, filter racks and access repairs extra.

$500 - $1,500 each

Roll Down Shutter

general

Supply and install one motorized exterior roll-down (hurricane/security) shutter on a standard window; manual models and small windows run lower, large windows/multi-window packages higher.

$400 - $1,000 each

Roller Shade

general

Roller Shade: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$100 - $350 each

Roman Shade

general

Supply and install one Roman window shade/blind on a standard window (fabric that folds into pleats); custom/large windows more.

$150 - $500 each

Sandstone Tiling

general

Install sandstone floor or wall tile with thinset, grout and sealer over a prepared substrate, per sq ft, materials and labor.

$12 - $28 per sq ft

Screen In Porch

general

Add screens, framing and a screen door to an existing covered porch, per sq ft of porch floor area.

$10 - $25 per sq ft

Seal Granite

general

Seal Granite: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$1.16 - $2.24 per sq ft

Seal Grout

general

Clean and apply penetrating sealer to tile grout lines, per sq ft of tiled area.

$0.75 - $2 per sq ft

Seal Limestone

general

Clean and apply penetrating/impregnating sealer to limestone floor or paving, per sq ft.

$1 - $3 per sq ft

Seal Surface

general

Clean and apply a protective sealer to an existing concrete or masonry surface (driveway, patio, floor), per sq ft.

$1 - $3 per sq ft

Side By Side Refrigerators

general

Supply, deliver and install a standard-depth side-by-side refrigerator connected to an existing water line.

$1,400 - $3,200 each

Sink Disposal

general

Install or replace a 1/2-3/4 HP garbage disposal under an existing kitchen sink, unit and plumber labor.

$200 - $625 each

Skim Coat

general

Skim Coat: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$0.95 - $1.35 per sq ft

Slate Chips

general

Loose slate landscape chips spread over prepared ground with weed-barrier fabric (~2 in. depth), material and labor per sq ft of coverage.

$2 - $4 per sq ft

Soaker Tub

general

Supply and install one mid-grade soaker/soaking bathtub (tub and labor) in an existing bathroom alcove; surround/tile work, plumbing rework and permits extra.

$1,000 - $2,500 each

Soaking Tub

general

Replace or install a deep soaking bathtub (acrylic to cast-iron/stone-resin, alcove, drop-in or freestanding) including tub, plumbing hookup and finish work.

$2,500 - $8,000 per project

Solar Paneling

general

Solar Paneling: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$1,000 - $1,500 each

Solar Shade

general

Solar Shade: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$100 - $350 each

Stainless Steel Hand Rail

general

Stainless steel stair or wall handrail (posts/brackets and rail) fabricated and installed, priced per linear foot.

$60 - $160 per linear ft

Stainless Steel Staircase

general

Custom stainless steel (or steel with stainless components) interior staircase, one straight flight with treads and railing, fabricated and installed.

$8,000 - $30,000 per project

Stair Spindles

general

Replace one stair spindle (baluster) in an existing railing, wood or iron, including removal, part, setting and finishing, priced per baluster.

$40 - $90 each

Steam Clean Carpets

general

Steam Clean Carpets: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$200 - $500 per project

Steam Clean Furniture

general

Steam/hot-water-extraction cleaning of one upholstered piece (armchair, loveseat or sofa); per-piece pricing, multi-piece discounts common.

$100 - $250 each

Steam Clean Grout

general

Steam Clean Grout: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$0.75 - $1.25 per sq ft

Steam Clean Tile

general

Steam Clean Tile: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$0.75 - $3 per sq ft

Steam Humidifier

general

Supply and install one whole-house steam humidifier on a forced-air HVAC system, including water line, drain, wiring and humidistat.

$800 - $2,200 each

Storm Shutter

general

Permanent storm shutters (accordion, panel tracks, roll-down) supplied and installed per sq ft of opening.

$15 - $40 per sq ft

Suspended Ceiling

general

New suspended (drop) ceiling: hung T-bar grid with standard mineral fiber tiles installed in a basement or room, per square foot of ceiling.

$6 - $14 per sq ft

Swamp Cooler

general

One whole-house evaporative (swamp) cooler, roof- or ground-mounted, supplied and installed with water line, electrical hookup and connection to ducts or a roof curb.

$1,500 - $3,700 each

Teak Floors

general

Solid or engineered teak hardwood flooring installed over a prepared subfloor, materials and labor, per square foot of floor.

$14 - $28 per sq ft

Tin Ceiling Tile

general

Pressed-metal (tin/steel) ceiling tiles supplied and installed (nail-up or drop-in).

$6 - $15 per sq ft

Tongue And Groove Ceiling

general

Install tongue and groove wood planks (pine to cedar) on a standard-height flat ceiling, materials and labor, per sq ft of ceiling.

$4 - $10 per sq ft

Tongue And Groove Paneling

general

Install solid wood tongue and groove wall paneling (pine to mid-grade hardwood) over existing walls, materials and labor, per sq ft of wall.

$6 - $14 per sq ft

Topcoat Fog Seal

general

Clean and apply a fog-seal or sealcoat topcoat to an existing asphalt driveway or lot, per sq ft.

$0.30 - $1.20 per sq ft

Towel Bar

general

Install one bathroom towel bar (bar supplied, mounted into studs or anchors on drywall or tile) by a handyman.

$65 - $150 each

Trash Compactor

general

Supply and install one residential trash compactor (built-in or freestanding 15 in unit) including cabinet fit and electrical hookup.

$1,100 - $2,700 each

Travertine Tile

general

Install travertine tile on floors or walls (commercial to premium grade), materials and labor, per sq ft.

$14 - $40 per sq ft

Trim Board

general

Install exterior trim boards (fascia, corner boards, window and door casing) in wood or PVC, primed and caulked, per linear ft.

$6 - $15 per linear ft

Trim Molding

general

Trim Molding: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$8.25 - $12 per linear ft

Turf Block

general

Install concrete turf block (grass paver grid) over excavated, compacted gravel base with soil fill and seed, per sq ft.

$8 - $20 per sq ft

TV Wall Mount

general

Professionally mount one flat-screen TV on a drywall wall with a standard fixed or tilting mount, cables surface-routed.

$120 - $330 each

Undermount Sink

general

Supply and install one undermount kitchen sink into an existing countertop cutout (sink and labor, including drain assembly and supply connections).

$450 - $1,000 each

Unlock Building

general

Locksmith lockout call to open a locked house, apartment or small commercial door without damage, business or after-hours.

$90 - $250 each

Unlock Vehicle

general

Locksmith or lockout service to open a locked car or truck without damage; key cutting/programming extra.

$75 - $225 each

Valance

general

Supply and install a fabric or wood window valance (top treatment) above a window, priced per linear foot of valance width.

$25 - $80 per linear ft