Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 48 of 559 services in general

Install Waste Disposal

general

Supply and install one 1/2-3/4 HP kitchen waste (garbage) disposal under an existing sink with an existing outlet.

$250 - $600 each

Install Water Filter System

general

Supply and install one whole-house (point-of-entry) water filtration system, sediment/carbon multi-stage, plumbed at the main with bypass.

$1,128 - $3,540 each

Install Water Line

general

Replace/install the main water service line from the meter or curb stop to the house (typically 25-75 ft of PEX or copper, trenched), including tie-ins and permit.

$1,500 - $5,000 per project

Install Water Shut Off Valve

general

Install Water Shut Off Valve: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$150 - $600 each

Install Water Softener

general

Supply and install one whole-house ion-exchange water softener (single-tank, ~32-48k grain) on an existing loop or new bypass, including drain and outlet hookup.

$1,200 - $3,500 each

Install Wax Ring

general

Pull and reset one toilet with a new wax ring (and closet bolts), plumber labor including leak check; flange repair extra.

$150 - $350 each

Install Whirlpool Tub

general

Supply and install one residential whirlpool (water-jetted) bathtub in an existing tub location, including tub, plumbing hookup, pump GFCI connection and access panel.

$3,000 - $9,000 per project

Install Whole House Dehumidifier

general

Supply and install one whole-house (ducted) dehumidifier tied into the HVAC system or a basement/crawl unit, including condensate drain.

$1,300 - $3,500 each

Install Whole House Fan

general

Supply and install one attic-floor whole-house fan with ceiling opening, louver/damper and wiring to a switch.

$900 - $2,500 per project

Install Wi-Fi Router

general

Technician visit to unpack, connect and configure one customer-supplied Wi-Fi router or small mesh kit, secure it and connect devices; equipment not included.

$100 - $200 per project

Install Wood Arbor

general

Supply and install one wood garden arbor (prefab kit set in concrete up to small custom-built cedar arbor) including posts and anchoring.

$1,000 - $3,500 each

Install Wood Gutters

general

Install Wood Gutters: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$32 - $45 per linear ft

Insulate Attic

general

Insulate Attic: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$3.60 - $7.40 per sq ft

Insulate Basement

general

Insulate Basement: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$4.38 - $6.42 per sq ft

Insulate Basement Ceiling

general

Insulate Basement Ceiling: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$2.75 - $6.09 per sq ft

Insulate Crawl Space

general

Insulate Crawl Space: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$2.75 - $6.09 per sq ft

Insulate Your Home

general

Insulate Your Home: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$1.26 - $2.77 per sq ft

Insulated Panels

general

Structural insulated panels (SIPs) supplied and erected for walls, per sq ft of wall.

$12 - $24 per sq ft

Insulated Sheathing

general

Install 1-2 in. rigid foam (XPS, EPS or polyiso) insulated sheathing on exterior walls with taped seams, before siding, per sq ft of wall, materials and labor.

$1.50 - $3.50 per sq ft

Interlocking Tile

general

Install snap-together interlocking floor tiles (PVC/polypropylene garage tiles, rubber, or composite/wood deck tiles) over an existing slab or deck, per sq ft, materials and labor.

$4 - $12 per sq ft

Iron Spiral Staircase

general

Supply and install one prefab steel or wrought/cast iron spiral staircase kit (single floor rise) with railing, anchored top and bottom.

$2,000 - $8,000 per project

Jetted Tub

general

Jetted tub supplied and installed in place of an existing tub (tub, plumbing, dedicated electrical for jets, labor); excludes full bathroom remodel.

$2,500 - $7,500 per project

Laminate Shelves

general

Supply and install laminate/melamine shelving (wall-mounted or closet shelf runs with brackets or standards), per linear ft of shelf, materials and labor.

$25 - $70 per linear ft

Linoleum Tiles

general

Install natural linoleum (Marmoleum-type) floor tiles over a prepared, leveled underlayment with adhesive, per sq ft, materials and labor.

$5 - $11 per sq ft

Luxury Vinyl Tiles

general

Supply and install luxury vinyl tile (floating click or glue-down) over a prepared subfloor, including underlayment and trim.

$4.50 - $11 per sq ft

Maintain Gutters

general

Maintain Gutters: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$4.49 - $5.53 per linear ft

Manage Building Inspection And Permitting Process

general

Manage Building Inspection And Permitting Process: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

Manage Building Inspection And Permitting Process cost guide

$187 - $227 per project

Manage Building Project

general

Manage Building Project: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$8,000 - $30,000 per project

Manage Home Improvement Project

general

Manage Home Improvement Project: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$2,000 - $7,000 per project

Manage Remodeling Project

general

Manage Remodeling Project: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$187 - $227 per project

Manage Remodeling Work

general

Manage Remodeling Work: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$187 - $227 per project

Manage Renovation Project

general

Manage Renovation Project: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$187 - $227 per project

Maple Cabinets

general

Supply and install maple kitchen cabinets (stock to semi-custom), base and wall units, per linear foot of run.

$200 - $600 per linear ft

Marlite Wall Panel

general

Install Marlite FRP (fiberglass reinforced) wall panels with adhesive, fasteners and trim moldings over drywall or block.

$4 - $9 per sq ft

Media Air Cleaner

general

Install a whole-house media air cleaner cabinet (4-5 in. extended media filter) in the HVAC return duct, including duct transition and sealing.

$600 - $1,500 per project

Metal Spindles

general

Per baluster: remove an old wood spindle and install a powder-coated iron/steel baluster (drilled, epoxy-set, with shoe) on an existing stair or rail, as part of a full staircase swap; new handrail/newels extra.

$40 - $90 each

Mexican Pavers

general

Install Mexican Saltillo or terracotta pavers on a patio slab or prepared base, set in thinset or mortar, grouted and sealed.

$10 - $22 per sq ft

Mini Blind

general

One prefabricated mini/micro blind supplied and mounted per window (blind and brackets and labor); motorized/custom options extra.

$20 - $140 each

Move Exhaust Vent

general

Relocate one bath/kitchen exhaust vent termination (up to ~15 ft of duct, new roof/wall cap, flashing, leak test); in-wall routing, drywall repair and fan replacement extra.

$500 - $1,000 each

Move Gas Line

general

Move Gas Line: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$429 - $525 per project

Move Water Line

general

Move Water Line: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$387 - $476 per project

Nylon Carpet

general

Supply and install nylon wall-to-wall carpet with pad, tack strip and seaming in a residential room.

$3.50 - $8 per sq ft

Oak Hand Rail

general

Install a solid oak stair handrail on wall brackets or between newels, including fitting, fastening and finish, per linear foot.

$30 - $60 per linear ft

Oak Spindles

general

Supply and install one oak stair baluster (spindle) between tread and handrail, including drilling, fastening and fill, per baluster.

$40 - $90 each

Oak Stair Tread

general

Remove old covering and supply and install one solid oak stair tread (with nosing) on an existing stair, sanded and finished.

$120 - $250 each

Oak Staircase

general

Build and install a new straight interior red/white oak staircase (about 12-15 risers) with handrail.

$2,000 - $6,000 each

Olefin Carpet

general

Supply and install olefin (polypropylene) carpet with pad, including labor, over a prepared floor.

$2.50 - $5.50 per sq ft

Ornamental Column

general

One decorative (non-load-bearing) porch/column wrap supplied and installed (column, mounting blocks, fasteners, labor, paint-ready finish); structural repair extra.

$400 - $800 each