Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 48 of 1,918 services

Floor Insulation

drywall & insulation

Insulate the underside of a floor over a crawl space or unheated area with batts, rigid board or spray foam between joists, supported in place.

$1 - $4.50 per sq ft

Flush Doors

windows & doors

Install an interior flush (flat-slab) door, hollow or solid core, pre-hung or slab, with hinges and basic hardware.

$250 - $800 each

Foam Board Insulation

drywall & insulation

Supply and install rigid foam board (EPS/XPS/polyiso, ~1-2 in) on walls, basement or foundation, taped and fastened, materials and labor.

$1.50 - $3.75 per sq ft

Foam Insulation

drywall & insulation

Professionally spray open-cell or closed-cell polyurethane foam insulation into walls, attic roof deck or rim joists at typical thickness.

$1.50 - $4.50 per sq ft

Foam Roof

roofing

Spray polyurethane foam (SPF) roof with elastomeric topcoat on a low-slope roof, materials and labor per sq ft; tear-off and deck repair extra.

$3.50 - $7 per sq ft

Foil Faced Insulation

drywall & insulation

Supply and install foil-faced insulation (foil-faced batts or reflective/radiant foil) in attic or walls, materials and labor.

$0.75 - $2.25 per sq ft

Folding Arm Awning

decks & fencing

Folding Arm Awning: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$18 - $25 per sq ft

Folding Closet Door

windows & doors

Supply and install one folding/bifold closet door with hardware in an existing opening; framing changes extra.

$250 - $800 each

Forced Air Electric Furnace

HVAC

Replace or install a forced-air electric furnace (10-20 kW) connected to existing ductwork, with electrical connection and disposal of the old unit.

$1,700 - $7,100 each

Forced Air Furnace

HVAC

Supply and install a standard-efficiency forced-air furnace (gas or electric) replacing an existing unit on existing ducts, including haul-away; new ductwork and fuel conversion excluded.

$3,000 - $7,000 per project

Forced Air Gas Furnace

HVAC

Replace a natural-gas forced-air furnace (80-96% AFUE) on existing ductwork, including venting, gas connection, permit and haul-away.

$3,500 - $8,000 each

Forced Air Heating System

HVAC

Install a complete forced-air heating system (furnace plus supply/return ductwork and registers), priced per square foot of conditioned area.

$4 - $9 per sq ft

Formica Countertop

kitchen

Supply and install a Formica/laminate countertop (template, cut, edge band, adhere, sink cutout) per sq ft of counter; removal of old top and plumbing extra.

$20 - $50 per sq ft

Formica Solid Surface Countertop

kitchen

Template, fabricate and install Formica-brand solid surface countertops with standard edge, seams and sink cutout.

Formica Solid Surface Countertop cost guide

$40 - $90 per sq ft

Frame Basement Walls

general

Frame Basement Walls: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$4.77 - $8.23 per sq ft

Frame Ceiling

general

Frame Ceiling: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$4.83 - $8.24 per sq ft

Frame Coffered Ceiling

general

Frame Coffered Ceiling: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$6.80 - $9.83 per sq ft

Frame Door Opening

windows & doors

Cut in and frame a rough door opening (king/jack studs, header) in an existing non-load-bearing interior wall; drywall finish and door extra.

$250 - $600 each

Frame Interior Wall

general

Frame Interior Wall: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$3.89 - $6.62 per sq ft

Frame Skylight Opening

roofing

Cut and frame one roof/ceiling opening for a skylight (headers, doubled rafters, light-shaft framing), skylight unit and roofing excluded.

$500 - $1,500 each

Frame Soffit

roofing

Frame Soffit: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$20 - $34 per linear ft

Frame Subfloor

flooring

Frame Subfloor: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$15 - $26 per sq ft

Frame Tray Ceiling

general

Frame Tray Ceiling: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$5.38 - $8.06 per sq ft

Frame Wall

general

Frame Wall: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$4.02 - $6.60 per sq ft

Frame Window Opening

windows & doors

Cut and frame one new window rough opening (header, jacks, kings, cripples) in an existing wood-frame exterior wall, window and siding/drywall repair excluded.

$600 - $2,000 each

Frameless Cabinet

kitchen

Supply and install frameless (European full-overlay) kitchen cabinets, base and wall, priced per linear foot of cabinet run.

$250 - $800 per linear ft

Frameless Glass Pool Fence

decks & fencing

Install a frameless tempered-glass pool safety fence on spigots or base channel, priced per linear foot (gates extra).

$200 - $500 per linear ft

Frameless Glass Shower Door

bathroom

Measure, supply and install a frameless 3/8-1/2 inch tempered glass shower door (door or door-and-panel) with hinges, handle and seals.

$1,000 - $2,800 each

French Door

windows & doors

One interior French door pair (glass panels, between rooms), prehung, supplied and installed.

$900 - $2,800 each

French Entry Door

windows & doors

Supply and install a pair of exterior French entry doors (glass double door) replacing an existing opening; sidelights, framing and finish extra.

$1,500 - $5,000 each

Frieze Carpet

general

Supply and install frieze (twisted-pile) carpet over new pad, including stretching, seaming and transitions.

$3.50 - $8 per sq ft

Front Loading Washing Machine

general

Buy and install a mid-range front-load washer on existing water, drain and power hookups, including leveling, new hoses and haul-away of the old unit.

$900 - $1,800 per project

FRP Wall Panel

general

Install fiberglass-reinforced plastic (FRP) wall panels with full-spread adhesive, trim and sealed seams over sound drywall or plywood.

$3.50 - $7.51 per sq ft

Furnace Humidifier

HVAC

Install a bypass or flow-through whole-house humidifier on an existing furnace, with water line, drain, humidistat and wiring.

$400 - $1,000 each

Furring Channel

general

Install metal hat (furring) channel at 16-24 inch centers on masonry, framing or ceilings to receive drywall, priced per sq ft of surface.

$1.69 - $4 per sq ft

Furring Strip

general

Install 1x wood furring strips at 16 in. on center over masonry or framed walls, shimmed flat, per sq ft of wall, materials and labor.

$2.25 - $4.50 per sq ft

Galvalume Roof

roofing

Tear-off and install a residential Galvalume steel roof (exposed-fastener panels to standing seam), per sq ft of roof area, materials and labor.

$7 - $14 per sq ft

Galvanized Gutters

general

Supply and install galvanized steel rain gutters (seamed or seamless) including hangers, outlets and labor, per linear foot; downspouts often extra.

$8 - $16 per linear ft

Galvanized Metal Roof

roofing

Install a residential galvanized steel panel roof (mostly exposed-fastener corrugated or ribbed), per sq ft of roof area, materials and labor.

$5 - $12 per sq ft

Garage Door

windows & doors

Garage Door: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$873 - $1,370 per project

Garage Door Opener

windows & doors

Supply and install one residential garage door opener (chain, belt, or screw drive) replacing an existing opener, unit plus labor.

$250 - $700 each

Garbage Disposal

kitchen

Supply and install one 1/3 to 3/4 HP garbage disposal under an existing sink with existing wiring, unit plus labor.

$225 - $600 each

Garden Edging

landscaping

Install garden bed edging (plastic, metal, brick, or precast concrete) in a trenched channel, per linear ft, materials and labor.

$3.49 - $12 per linear ft

Garden Paver

concrete & masonry

Install a concrete or brick paver garden walkway or small patio on compacted gravel and sand base, per sq ft, materials and labor.

$12 - $30 per sq ft

Gas Cooktop

kitchen

Gas Cooktop: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$1,494 - $2,952 per project

Gas Dryer

general

Supply and install a mid-range gas dryer on an existing gas line and vent, including connector, leak test and venting hookup.

$760 - $1,550 each

Gas Hot Water Heater

plumbing

Replace and install one 40-50 gallon natural gas tank water heater, unit, venting connection, gas/water hookup and haul-away included.

$1,000 - $3,000 each

Gas Oven

general

Supply a freestanding or slide-in gas range/oven and connect it to an existing gas line and outlet, unit plus labor.

$700 - $2,200 each