Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 48 of 1,918 services

Tape Drywall Joints

drywall & insulation

Tape Drywall Joints: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$1.25 - $1.51 per linear ft

Tar And Gravel Roof

roofing

Built-up (tar and gravel) roof: multiple plies of asphalt felt mopped with hot asphalt and topped with gravel on a flat or low-slope roof, per square foot of roof.

$4 - $8 per sq ft

Teak Decking

decks & fencing

New residential outdoor deck surfaced with teak hardwood decking boards on a pressure-treated frame, materials and labor, per square foot of deck.

$50 - $95 per sq ft

Teak Floors

general

Solid or engineered teak hardwood flooring installed over a prepared subfloor, materials and labor, per square foot of floor.

$14 - $28 per sq ft

Terracotta Roof Tile

roofing

Tear off and install a terracotta (clay) tile roof with underlayment, per sq ft of roof area.

$10 - $25 per sq ft

Terrazzo Countertop

kitchen

Precast terrazzo slab countertop fabricated and installed with sink cutout and edge profile, per square foot of counter surface.

$40 - $100 per sq ft

Terrazzo Flooring

flooring

Terrazzo floor installed, either terrazzo tile set in mortar or thin-set poured epoxy terrazzo ground and polished, per square foot of floor.

$18 - $45 per sq ft

Texture Drywall

drywall & insulation

Texture Drywall: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$1.09 - $1.53 per sq ft

Thermofoil Cabinet

kitchen

Stock or semi-custom thermofoil (vinyl-wrapped MDF) kitchen cabinets, base and wall units, supplied and installed, per linear foot of cabinet run; countertops excluded.

$150 - $400 per linear ft

Thin Brick Paver

concrete & masonry

Supply and install thin brick pavers/veneer over an existing patio or floor surface (thin brick units and setting labor, no full-depth base rebuild).

$8 - $22 per sq ft

Thin Paver

concrete & masonry

Thin (about 3/4 to 1-1/2 inch) concrete, brick or stone overlay pavers bonded over an existing sound concrete patio, walkway or pool deck, per square foot.

$12 - $25 per sq ft

Thin Stone Veneer

concrete & masonry

Supply and install thin stone veneer (manufactured or natural) on walls, materials and labor per sq ft of wall area.

$18 - $40 per sq ft

Tigerwood Decking

decks & fencing

New residential deck surfaced with tigerwood (goncalo alves) hardwood boards on a pressure-treated frame, materials and labor, per square foot of deck.

$40 - $65 per sq ft

Tile On Shower

bathroom

Tiling one standard shower (three walls plus floor) with ceramic or porcelain tile, including backer board, waterproofing, setting materials and labor.

$1,800 - $5,000 each

Tin Ceiling Tile

general

Pressed-metal (tin/steel) ceiling tiles supplied and installed (nail-up or drop-in).

$6 - $15 per sq ft

Tin Roof

roofing

Tin-style metal roof (corrugated or ribbed exposed-fastener steel, galvalume or terne-coated panels) installed over underlayment, per square foot of roof.

$6 - $14 per sq ft

Toilet Seat

bathroom

Replace one toilet seat (remove old seat, supply and fit a standard or soft-close seat) by a handyman or plumber, seat included.

$80 - $200 each

Tongue And Groove Ceiling

general

Install tongue and groove wood planks (pine to cedar) on a standard-height flat ceiling, materials and labor, per sq ft of ceiling.

$4 - $10 per sq ft

Tongue And Groove Paneling

general

Install solid wood tongue and groove wall paneling (pine to mid-grade hardwood) over existing walls, materials and labor, per sq ft of wall.

$6 - $14 per sq ft

Topcoat Fog Seal

general

Clean and apply a fog-seal or sealcoat topcoat to an existing asphalt driveway or lot, per sq ft.

$0.30 - $1.20 per sq ft

Towel Bar

general

Install one bathroom towel bar (bar supplied, mounted into studs or anchors on drywall or tile) by a handyman.

$65 - $150 each

TPO Roof

roofing

Install a single-ply TPO membrane roof with insulation board on a flat or low-slope roof, including typical tear-off, per sq ft of roof.

$5 - $12 per sq ft

Track Lighting

electrical

Supply and install one track lighting system on an existing circuit (track and heads and mounting, materials and labor); new ceiling wiring/circuits extra.

$150 - $450 each

Transplant Tree

landscaping

Dig, move and replant one small-to-medium tree (under ~20 ft) on the same property with watering and staking; large-spade moves cost more.

$250 - $1,000 per project

Trash Compactor

general

Supply and install one residential trash compactor (built-in or freestanding 15 in unit) including cabinet fit and electrical hookup.

$1,100 - $2,700 each

Travertine Backsplash

kitchen

Install a travertine tile kitchen backsplash (tile, setting, grout and sealing), per sq ft of wall.

$15 - $35 per sq ft

Travertine Flooring

flooring

Install travertine tile flooring (standard grade, tile, mortar, grout and sealing), per sq ft of floor.

$15 - $35 per sq ft

Travertine Paver

concrete & masonry

Install travertine pavers for a patio, walkway or pool deck over a compacted gravel and sand base, per sq ft.

$12 - $27 per sq ft

Travertine Tile

general

Install travertine tile on floors or walls (commercial to premium grade), materials and labor, per sq ft.

$14 - $40 per sq ft

Treat Lawn Insects

landscaping

Treat Lawn Insects: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$0.34 - $0.44 per sq ft

Trim Board

general

Install exterior trim boards (fascia, corner boards, window and door casing) in wood or PVC, primed and caulked, per linear ft.

$6 - $15 per linear ft

Trim Molding

general

Trim Molding: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$8.25 - $12 per linear ft

Tumbled Marble Backsplash

kitchen

Tumbled marble tile backsplash supplied and installed.

$20 - $40 per sq ft

Tuneup HVAC System

HVAC

One HVAC tune-up visit on a single system (furnace or AC): inspection, cleaning, performance test, written report - labor only, no repairs.

$150 - $350 per project

Turf Block

general

Install concrete turf block (grass paver grid) over excavated, compacted gravel base with soil fill and seed, per sq ft.

$8 - $20 per sq ft

TV Wall Mount

general

Professionally mount one flat-screen TV on a drywall wall with a standard fixed or tilting mount, cables surface-routed.

$120 - $330 each

Under Cabinet Lighting

kitchen

Under Cabinet Lighting: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$250 - $800 per project

Under Counter Lighting

electrical

Install LED strip or light-bar lighting under kitchen counters or cabinets, hardwired with driver, per linear ft of run.

$20 - $45 per linear ft

Underlay Laminate Floor

flooring

Supply and install foam, felt or cork underlayment beneath floating laminate flooring, per square foot of floor (laminate itself not included).

$0.50 - $1.50 per sq ft

Underlayment For Metal Roof

roofing

Install synthetic or high-temperature self-adhered underlayment on the roof deck beneath a metal roof, materials and labor per square foot of roof (metal panels not included).

$0.75 - $2.50 per sq ft

Undermount Sink

general

Supply and install one undermount kitchen sink into an existing countertop cutout (sink and labor, including drain assembly and supply connections).

$450 - $1,000 each

Unfinished Cabinet

kitchen

Unfinished stock kitchen cabinets supplied and installed (finishing not included), per linear ft.

$150 - $325 per linear ft

Unlock Building

general

Locksmith lockout call to open a locked house, apartment or small commercial door without damage, business or after-hours.

$90 - $250 each

Unlock Vehicle

general

Locksmith or lockout service to open a locked car or truck without damage; key cutting/programming extra.

$75 - $225 each

Upgrade Electrical Service Panel

electrical

Upgrade Electrical Service Panel: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$385 - $466 per project

Valance

general

Supply and install a fabric or wood window valance (top treatment) above a window, priced per linear foot of valance width.

$25 - $80 per linear ft

Veneer Door

windows & doors

Supply and install one wood-veneer (solid- or engineered-core) interior door, slab or pre-hung, including hanging, hardware fit-up and trim touch-up.

$300 - $950 each

Vertical Blind

general

Supply and install one vertical blind on a window or sliding-door opening (blind and hanging labor, per opening).

$75 - $350 each