Construction cost calculators by trade.

Compare cost ranges for 1,918 construction services, then adjust your job details.

All flooring bathroom kitchen roofing windows & doors painting & finishes HVAC plumbing electrical concrete & masonry decks & fencing landscaping drywall & insulation pool & spa siding & exterior general

Showing 31 of 559 services in general

Vertical Blind

general

Supply and install one vertical blind on a window or sliding-door opening (blind and hanging labor, per opening).

$75 - $350 each

Vessel Sink

general

Supply and install a vessel bathroom sink on an existing vanity top, including vessel faucet or drain hookup, plumbing labor and removal of the old sink.

$300 - $1,100 each

Vinyl Beadboard

general

Supply and install PVC/vinyl beadboard panels on a wall (wainscot height) or ceiling, including trim caps and cutting, per square foot of covered surface.

$5 - $15 per sq ft

Vinyl Shutter

general

Supply and install one pair (two panels) of decorative vinyl shutters on one window, materials and labor per window.

$150 - $450 each

Wainscot Wall Paneling

general

Supply and install wainscot wall paneling (flat panel, beadboard, board-and-batten or raised panel) with cap and base trim, painted or finished, per square foot of paneled wall.

$10 - $30 per sq ft

Wall Oven

general

Single built-in wall oven supplied and installed into an existing cutout and circuit.

$1,000 - $3,500 each

Walnut Ceiling Beam

general

Supply and install solid or box-built walnut decorative ceiling beams, stained/finished and fastened to the ceiling, per linear foot of beam.

$50 - $110 per linear ft

Walnut Floors

general

Supply and install solid or engineered walnut hardwood flooring (American black walnut or Brazilian walnut), nail- or glue-down, per square foot of floor.

$9 - $16 per sq ft

Walnut Paneling

general

Supply and install walnut wood wall paneling (veneer panels or solid tongue-and-groove boards) on an existing wall, finished, per square foot of wall.

$15 - $40 per sq ft

Walnut Plank Ceiling

general

Solid walnut tongue-and-groove plank ceiling supplied, installed and finished.

$15 - $30 per sq ft

Walnut Stairs

general

Per step: supply and install a solid walnut stair tread (with riser cap or painted riser) over an existing stair, including carpet/old tread removal and finish; railings and structural stair work extra.

$200 - $400 each

Warming Drawer

general

Supply and install one built-in 24-30 in. electric kitchen warming drawer in base cabinetry, including electrical hookup and cabinet fit-up.

$1,320 - $2,779 each

Water Dispenser

general

Supply and install one plumbed-in (bottleless, point-of-use) hot/cold water dispenser for a home or office, including water-line tap and filter setup.

$700 - $2,500 each

Water Filtration

general

Supply and install a whole-house water filtration system (system and plumbing labor) on a city-water home; well-water/RO/UV packages run higher.

$1,000 - $4,000 per project

Water Softener

general

Supply and install one whole-house water softener (unit and plumbing labor); complex/whole-home RO or dual-tank systems run higher.

$1,000 - $3,000 each

Water Ultrafiltration

general

Supply and install a whole-house ultrafiltration (hollow-fiber membrane) water system at the main line, with sediment/carbon pre-filtration, bypass and plumbing connections.

$1,300 - $3,500 each

Waterproof Basement

general

Waterproof Basement: national installed price range, materials and labor breakdown, and local pricing by ZIP code.

$11 - $13 per sq ft

Wax Floors

general

Professional strip and wax (remove old finish, apply 2-4 coats of floor finish) on resilient floors such as VCT, sheet vinyl or linoleum.

$0.75 - $2 per sq ft

Weather Stripping

general

Professional weatherstripping of a typical home's exterior doors and windows (handyman, materials and labor).

$150 - $500 per project

Whole House Fan

general

Supply and install one whole-house (attic) fan, including ceiling cut-in, attic venting check and wiring to an existing or new switch circuit.

$900 - $2,500 per project

Wilsonart Solid Surface

general

Fabricate and install Wilsonart solid surface countertops (seamless joints, integrated edge), including templating and removal of old tops, per square foot of countertop.

$45 - $100 per sq ft

Wood Baseboard

general

Solid wood baseboard supplied, cut, nailed and caulked (paint/stain extra).

$6 - $12 per linear ft

Wood Blind

general

Supply and install wood blinds on one standard window (blind and hanging labor, per window).

$150 - $450 each

Wood Crown Molding

general

Supply and install wood crown molding per linear foot (measure, cut, cope, nail, patch and caulk edges); painting extra.

$7 - $22 per linear ft

Wood Handrail

general

Wall-mounted wood stair handrail with brackets supplied and installed (no balusters).

$25 - $60 per linear ft

Wood Paneling

general

Solid wood or wood-veneer wall paneling (T&G, shiplap, beadboard) supplied and installed.

$7 - $16 per sq ft

Wood Shutter

general

Supply and install one pair of exterior wood shutters (louvered, raised-panel or board-and-batten) on a standard window.

$150 - $500 each

Wood Spindles

general

Remove and replace wood stair spindles (balusters) in an existing railing, including drilling, gluing and finish touch-up, priced per spindle on a multi-spindle job.

$40 - $100 each

Wood Stair Tread

general

Replace or install one hardwood stair tread (tread material and labor per step); risers, rail and removal of old treads may be extra.

$100 - $200 each

Woven Wood Shade

general

One woven wood (bamboo/reed) shade for a standard window, supplied and installed; lining or motorization extra.

$150 - $450 each

Wrought Iron Spindles

general

Replace/install one wrought-iron stair baluster (spindle) including base shoe and epoxy, materials and labor, keeping existing handrail and newels.

$30 - $50 each